All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

MSRP: $39.99
Your Price: $36.11
Savings: $ 3.88 ( 10% )
Shipping: Usually ships in 24 hours
Manufacturer: E. Emerson Tool Co

Buy All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

Prices subject to change. Please verify price during checkout.

All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track Features
All in one clamp 36-inch grip clamp guide with T-track is the best straight edge made T-track accepts all the accessories, router plates, saw plates stop blocks dowel jigs pocket hole jigs All in one clamps are all the same height the thickness matches 3/4 plywood Scale ruler available in metric or inch Jaws holes accept tall jaws, wide jaws, and story sticks accessories

Accessories for your All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track
Fine Woodworking Exploring Woodworking: Fundamentals of Technology All in One Clamp RP 8-Inch by 9-Inch Router Plate Franklin International Titebond II Premium Wood Glue, 16-Ounces #5004 Gorilla Glue 50008 Adhesive, 8-Ounces

Related All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track Products
Clamp All One A-36 36-Inch T-Track with Guide in Grip Clamp All Clamp in A-36 Grip Clamp 36-Inch T-Track One with Guide All Grip with T-Track Clamp Clamp A-36 in One Guide 36-Inch 36-Inch in Clamp All Guide Grip with Clamp A-36 T-Track One 36-Inch Guide in Clamp with Clamp T-Track A-36 Grip All One

Additional All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track Information

The first zero-deflection straight edge clamping guide! Provides you with straighter and more accurate cuts, dadoes and routing without additional clamps.

New and improved design features:
30% wider integral clamping jaws for tighter clamping and less
marring of wood.
50% wider locking lever for quick, easy clamping of guide.
Full-color measuring scale with large numbers (in 1/4" increments).

The perfect woodworking combination clamp and edge guide!
Integral clamping jaws and locking lever provide a quick, easy
way of clamping the guide.

Features instant edge-to-edge clamping, low profile with no
obstruction, extra long handle and 1-3/4" wide extrusion.
Built-in T-track on top of the guide allows you to use any of our
versatile accessories or shop-made jigs.

Please Note: To engage the jaw the first few times, the "I"-shaped blue finger-grip MUST be pushed snug against the sliding jaw for the jaw to lock. Squeeze together until it clicks. Then push the finger-grip AWAY from the jaw to unlock sliding jaw.

What Customers Say About All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track:

I may get one soon myself, as I can see myself forgetting to do the thumb-pushing trick under a heavy workload. As long as you do not bear up against the edge, this guide lets you cut straight, but as I discovered cutting the bottoms off of two bathroom cabinets, if you bear against the edge with even moderate effort, the guide bows away from the line of cut, and you have damaged your workpiece.I compensated by increasing my cutting speed, and pushing the guide towards the tool with the thumb of the hand that wasn't gripping the tool (a cordless circular saw).So it will work OK if you can work around it's inherent lack of rigidity. Or buy a thicker, wider guide.

This tends to make using this clamp a great deal more trouble than it's worth. With repeated usage, you'll have a vast collection of these little dings all along the clamping bar in a matter of days, making it virtually impossible to slide the jaw/finger grip around without a great deal of force. I also don't like the way the finger grip prevents you from sliding an average sized carpenter's square flush against the far end to check your alignment. I really, really like these things, but they just do not last. Every single time you engage the clamp, the "chips" make a little ding in the surprisingly soft steel rod underneath.

Anyone who has trouble setting up or using one of these SHOULD NOT BE AROUND POWER TOOLS OR IN A WOODWORKING SHOP. I wish I would have had them years ago. This is one of the best clamps/straight edge that I have ever purchased. I use it mostly for a Saw/Router guide.

I'd buy it again. It does everything I ask of it, but not always square upon setup. Check for square before the cut.

If it's out of position, you'll think it's tight when you flip the handle, but it will slip. Be careful that you have the toggle handle in the right position when you snug the guide up (in other words, before you flip it tight). Do it right and it holds perfectly. I use this frequently. Originally bought to trim about a dozen doors, I've found it is the handiest cutting guide I have.

All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track Features

Accessories for your All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track

Related All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track Products

Additional All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track Information

What Customers Say About All in One Clamp A-36 36-Inch Grip Clamp Guide with T-Track: